Best Auto Salvage Yards in Arlington, VA

On the day of the recovery placing the equipment was very difficult due to the ground still being wet. We had to winch all three trucks into place and getting the skid steer into place was a task due to how slippery it was. Using four 4-ton snatch blocks, I was able to get 10 lines to the load which only put 2,934 LBS on each line, significantly reducing the chance of overloading any of the lines and preventing any lines from breaking. It took about 1.5 hours to get set up on the first pull. After getting the boom lift out of the hole it was in, we had to readjust our trucks 3 more times with three other pulls. This got the boom lift where we needed it to be for us to get a heavy wrecker on it to pull it the rest of the way. We then had a 50-ton rotator back down between the townhouses and rig up to the boom lift using two 8-ton snatch blocks, two lines, two endless loops, and setting in its outriggers. We were able to pull the boom lift the rest of the way out.