Popular Cities
0 of these 24 mechanics are in Tacoma; the rest are in Gig Harbor, Puyallup and Lacey.
None of the 24 mechanics listed here are in Tacoma itself; they are in towns including Gig Harbor (14), Puyallup (4), Lacey (2).
Ratings range from 4.3 to 5.0 across 5,218 reviews; 20 mechanics have 50 or more reviews; 18 are rated 4.5 or higher.
4 mention certified staff (ASE).
4 give free estimates; 12 describe themselves as family- or locally-owned.
Services most often listed on their websites: schedule service (2), services overview (2) and all major tire brands (2).
2 mention Spanish-speaking staff.
In structured review feedback, customers of these mechanics most often flagged professionalism (100%), quality (73%) and value (68%).
24 of the 24 mechanics have a website on file; 14 publish a contact page; 6 list a public email.
16 of these mechanics have had their website domain for ten or more years; the oldest was registered in 1997.
Figures are counted over the mechanics on this page from public listings and company websites collected in 2026; distances are straight-line; hours and prices change, so confirm before you visit.
The 24 shops on this page list coolant flushes and antifreeze service in Tacoma, WA. What each one says about the coolant types it stocks, machine flushes and warranties comes from its own website; ratings and quotes come from public reviews.
About an hour of work on a straightforward car, longer on engines that need a vacuum fill or a slow bleed with the heater running. The bleeding is the part that cannot be rushed, so a shop that books it as a quick job between two others may cut that short.
Possibly. A flush is a standard add-on at the counter, and the honest test is what your manual says and what the coolant measures. Ask to see the test strip or the refractometer reading. If the answer is that it looks dirty, that is an opinion about dye.
Look at the reservoir level when the engine is stone cold, not hot, and expect it to settle a little as the last air works out. The heater should blow properly hot and the gauge should sit steady. Ask whether the pressure cap was replaced, since an old cap undoes a good job.
Excerpts from public reviews of the mechanics listed on this page.
