Best Vehicle Wrapping Services in Atlanta, GA

No. With primed and unpainted vehicles or body kits, the surface texture does not allow for proper adhesion of air egress vinyls, and makes the wrap prone to failure & lifting.

Primarily, the film thickness. Matte opaque options have become more and more popular for those wanting a complete color change, while our satin clear applications are more tailored to those who simply want to change their factory paint finish while also adding a layer of protection.

Most definitely. Dirt and contaminants on your exterior would be trapped under the film, posing greater harm to your paint and eventually causing the wrap to fail if they were not cleaned off before installation. Thus, we must require a full 24- step hand wash and clay bar decontamination before the wrap is applied.

There are a few courses of action we can take depending on how your wrap gets damaged, where the damage occurred, and how extensive it is. Worst case scenario, the wrap must be removed entirely, but more than likely we will be able to pull a section of the wrap and replace it with a new piece of film that was left over from your installation. Depending on the design or layout of your wrap and where the damage is located, we may also need to reprint graphics or simply patch a spot in.