Best Car Wraps in Pompano Beach, FL

NO. Unlike other products on the market, our films use a dry adhesive system. This allows for an optically perfect film that enhances your view, not impairs it. Based on the film you select, it may be impossible to tell visually that the film was even installed.

There is a lifetime warranty on residential installations and a 10-year warranty on commercial installations. Our manufacturers warranty against bubbling, cracking, delaminating, crazing or peeling for the specified period all are covered to give you a piece of mind.

Majority of the products are made for interior installation. in fact most decorative window films are installed on the interior of windows in both residential and commercial settings. However, exterior window tints are available for both residential and commercial settings. Exterior window film is commonly used for large buildings or double pane glass that is easily accessible to reach from the exterior. Speak with a sales representative to see if interior window film or exterior window film is right for you!

There are various different shades in window film. All window film works the same but have different hues of color. When it comes to decorative window film you can choose from frosted window film, blackout window film, whiteout film and more. Speak with a sales representative to figure out which window film will work best for you.

The installation begins by clearing access to the windows. Any furniture or window treatments should be moved to the side or out of the way to provide easy access to the windows. Care should be taken since window treatments are very expensive. Your window tinting installer should cover any flooring or carpeting in from of the windows. Drop cloths should be used to protect the flooring from the water solution used during the installation process. The next step is to properly clean the glass and frame. Our installer pay special attention to remove any foreign particles from the glass and from around the edges of the window, such as paint, varnish, caulks, etc. The window is then squeegeed to dry. The window film is now ready for the actual installation. A release is pulled from the top of the film to expose the adhesive on the film. While the film is being peeled, soapy water is sprayed on the film and window. This helps to reduce the static electricity generated by the liner removal and allows for proper positioning of the film on the window. The film is squeegeed and trimmed to fit the window. A final check for excess water both under the film and around the framing is done. Finally, any drop cloths are picked up and removed. Any window treatments that may have been moved are replaced along with any furniture moved back into place.