Popular Cities
12 of these 24 mechanics are in High Point; the rest are in Kernersville, Kannapolis and Burlington.
Of the 24 mechanics listed here, 12 are in High Point itself; the others are in Kernersville (6), Kannapolis (4), Burlington (2).
Ratings range from 4.2 to 5.0 across 2,584 reviews; 14 mechanics have 50 or more reviews; 20 are rated 4.5 or higher.
4 mention certified staff (ASE).
6 describe themselves as family- or locally-owned.
Services most often listed on their websites: car care tips (8), lift kits (4), jasper engines & transmissions (4), schedule a repair (4), towing services (4), headlight restoration (4) and transmission service (2).
10 of the 24 mechanics have a website on file; 10 publish a contact page; 6 list a public email.
8 of these mechanics have had their website domain for ten or more years; the oldest was registered in 2005.
Figures are counted over the mechanics on this page from public listings and company websites collected in 2026; distances are straight-line; hours and prices change, so confirm before you visit.
The 24 shops on this page handle tire rotation, balancing and sensor work in and around High Point, NC. Services listed, hours and booking come from each shop's own website; ratings and quotes come from public reviews.
Check it cold, before you drive, with your own gauge rather than the one chained to the air pump. The target is on the door placard, not on the tire sidewall, because the sidewall figure is the tire's maximum and not what your car wants. Check the spare while you are there.
If you run two sets of tires, yes. Swapping mounted wheels is quick bolt-off work, while sharing one set of rims means breaking the bead and rebalancing twice a year, which costs more each time and wears the bead area. The rims pay for themselves over a few seasons.
Yes, and a good shop tells you to come back for it without being asked. Nuts settle after the wheel has been driven on, and a torque wrench takes a minute. Watch for a shop that runs them down with an impact gun and never touches a torque wrench, because over-tightening warps brake rotors.
Excerpts from public reviews of the mechanics listed on this page.
