Popular Cities
Midvale has 4 specialists of its own; this list adds 4 from Murray (4, 2 mi).
Of the 24 specialists listed here, 20 are in Midvale itself; the others are in Murray (4, 2 mi).
Ratings range from 4.3 to 4.9 across 11,800 reviews; 24 specialists have 50 or more reviews; 18 are rated 4.5 or higher.
2 are BBB-accredited; 8 mention certified staff (ASE).
6 describe themselves as family- or locally-owned.
Services most often listed on their websites: oil change (8), wheel alignment (6), engine repair (4), factory scheduled maintenance (4), check engine light diagnostics (4), preventative maintenance (4) and radiator service (4).
In structured review feedback, customers of these specialists most often flagged professionalism (80%), quality (47%) and value (47%).
24 of the 24 specialists have a website on file; 22 publish a contact page; 10 list a public email; 8 take online bookings.
16 of these specialists have had their website domain for ten or more years; the oldest was registered in 1999.
Figures are counted over the specialists on this page from public listings and company websites collected in 2026; distances are straight-line; hours and prices change, so confirm before you visit.
The 24 shops on this page handle car electrical work in Midvale, UT. What each one says about fault finding, wiring repair and module work comes from its own website; ratings and quotes come from public reviews.
Everything you noticed. Time of day, hot or cold engine, wet or dry weather, rough road or smooth, what else was switched on, and whether anything was installed recently. A short phone video of the dash while it misbehaves is worth more than any description you can give at the counter.
Often, yes, and that is the right answer rather than a stalling one. A fault that turns up once a week cannot be caught in a one-hour slot. Ask how they plan to reproduce it and whether they will call you before the diagnostic time runs past what you agreed.
Repair, usually. A proper repair means the damaged section cut out, new wire soldered or crimped with the right terminal, and the joint sealed against water. What you do not want is a twist of tape or a splice connector jabbed through the insulation, because that is next year's fault. Whole harnesses are replaced only after fire or heavy damage.
Excerpts from public reviews of the specialists listed on this page.
